BASIC BLOCK DIAGRAM OF RO SYSTEM REVERSE OSMOSIS PROCESS RO is a form of filtration using osmosis in reverse. Water passes from a more concentrated solution to a less concentrated solution. To accomplish this a force or pressure must be applied. RO requires 1 psi of pressure for every 100 ppm of TDS. RO is used to remove dissolved solids from water but it can also improve taste, odor & colour of water. RO membranes have the capability to remove particles as small as ions i.e. magnesium ions or sodium ions. RO membrane will reject most compounds based largely on size. Dissolved ions, such as salts, carry an electric charge and will also be rejected by membrane. The major component present in the RO System are: Spun Filter Anti-Scalant Balls Pre Carbon Sediment Membrane Post Carbon UV chamber Alkaline SMPS Auto Flush Timer Diverter Valve Low Pressure Switch Solenoid Valve Booster Pump Flow Restrictor Float Switch with Ball Tank Tap How To Measure TDS TDS in water can...
Comments
Post a Comment